Hand Crafted Timepieces

Each of our timepieces is personally hand crafted, fully tested and include a individually numbered certificate of authenticity.

We have many different dial, crown and movement options listed below to custom tailor our timepieces to your individual specifications.

Our watches are assembled using the Swiss Made ETA mechanical movements. These are available in several degrees of engraving, decoration and plating.

Our water-resistant cases are imported from Switzerland, Germany and France. The WR rating is from 50 meters to 200 meters. The seals are set and lubed with silicone DC7 waterproof grease.

Our dials are manufactured in Germany by Schätzle & Cie. GmbH. The application of Swiss Superluminova compound in either C1, C3 or BGW9 is factory applied over a pure white base in a multi-layer process.

Each movement is run in for two days, monitored and painstakingly adjusted for accuracy with a TYMC MTG 4000A timegrapher prior to shipping. In order to get the most accurate timing results we remove the complete automatic assembly, adjust the beat and regulator arms by hand while leaving the micro adjustment screw in the dead center factory position setting.

Vintage Hamilton Project - 795.00

Case

Made In Germany- 42mm Three Piece Modular 316L polished stainless steel case specifically engineered for the Hamilton Size 10 American Made hand wind movements. Threaded 45 degree bezel with inside AR coated sapphire crystal Threaded exhibition back with CNC engravings and AR coated sapphire crystal. The case is available with choice crown. 22mm lug width. Lug to lug 52.15. Height 10.90. Water resistant rating 50 meters.

Crown type

-Flat low profile coin edge

-Small onion

-Large diamond

Standard movement

-Hamilton 302 completely serviced hand wind pocket watch movement - Incabloc shock protection with screw balance, engraved bridges, gold chatons, sun bursted winding wheels and polished screws.

Movement upgrades

-Hamilton 917- size 10 pocket watch movement - completely refurbished with NOS modified stem, polished or replaced NOS bridge and case screws, new modern unbreakable mainspring, polished pivots, over coil hairspring reworked and set in beat, balance wheel poised and regulated for accuracy. In most cases we have used 2 movements for each movement restoration. 195.00

-Hamilton 945- size 10 pocket watch movement - completely refurbished with NOS modified stem, polished or replaced NOS bridge and case screws, new modern unbreakable mainspring, polished pivots, over coil hairspring reworked and set in beat, balance wheel poised and regulated for accuracy. In most cases we have used 2 movements for each movement restoration. 395.00

-Hamilton 921- size 10 pocket watch movement - solid gold gear train completely refurbished with NOS modified stem, polished or replaced NOS bridge and case screws, new modern unbreakable mainspring, polished pivots, over coil hairspring reworked and set in beat, balance wheel poised and regulated for accuracy. In most cases we have used 2 movements for each movement restoration. 695.00

-Hamilton 923- size 10 pocket watch movement - solid gold gear train completely refurbished with NOS modified stem, polished or replaced NOS bridge and case screws, new modern unbreakable mainspring, polished pivots, over coil hairspring reworked and set in beat, balance wheel poised and regulated for accuracy. In most cases we have used 2 movements for each movement restoration. 1,695.00

Dials Hamilton

-Ivory classic dial similar to an original Hamilton pocket watch print dating back to 1940 with gloss black enamel moon hand set.

-Matte black military dial similar to an original Hamilton GG-W-113 combat issue wristwatch dating back to the Vietnam era with matte white hand set both applied with C1 and C3 Superluminova.

Dial upgrade

-Made In Germany - 925/000 pure sterling silver marine dial. 95.00

Dial print

-Choice of Wilson Watch Works USA logo print.

Hand upgrade

-Made In Germany - Temperature blued hands. 95.00

Case finishing upgrades

-Hand brushed.

-Custom ruby stone bead blasted on site. 65.00

-Industrial grade red gold plating. 175.00

Crystal upgrade

-Swiss made domed sapphire crystal with inside AR coating. 50.00

Strap

-Choice of premium leather, rubber or nylon strap.

Buckle

-Choice of tang or butterfly deployant buckle.

Limited edition

Serial numbers 00-32

Handwind Timepiece - 595.00

Case

Imported from France - 41mm Three Piece Modular 316L polished stainless steel case specifically engineered for the Unitas hand wind movements. Threaded 45 degree bezel with flat sapphire crystal and threaded exhibition back. 22mm lug width. Lug to lug 48.50. Height 11.00. Water resistant rating 50 meters.

Case upgrades

Made In Germany- Limited Edition 42mm Three Piece Modular 316L polished stainless steel case specifically engineered for the Unitas handwind movements. Swiss made flat front crystal with threaded 45 degree bezel and threaded exhibition back with sapphire crystal. The case is available with choice crown. 22mm lug width. Lug to lug 52.15. Height 10.90. Water resistant rating 50 meters. CNC engraved serial numbers 00-05. 195.00

Made In Germany - 42mm 18K solid rose gold hand burnished three piece modular case specifically engineered for the Unitas handwind movements. 45 degree threaded bezel with Swiss made domed crystal and inside AR coating. Flat coin edge crown. Threaded exhibition back with sapphire crystal. Made In Germany by Fricker GmbH & Co. KG. Factory pressure tested to 5ATM. Very heavy 67.7 complete case gram weight. 5,395.00

Crown type

-Flat low profile coin edge

-Small onion

-Large diamond

Standard movement

-Swiss Made ETA hand wind 18.000 a/h, Novodiac shock protection nickel plated movement with polished screws.

Movement upgrades

-Swiss Made ETA Soigné 18.000 a/h, Incabloc shock protection movement with Geneva stripes decoration, sun bursted winding wheels and blued screws. 195.00

-Swiss UT 6498 Rose gold plated handwind 18.000 a/h, Incabloc shock protection movement. Completely hand engraved by master engraver Reinhard Gemmrich with hand cut winding wheels by Jochen Benzinger in Germany. 1,495.00

-Swiss ETA 6498-1 Rose gold plated handwind 18.000 a/h, Incabloc shock protection movement. Completely hand engraved by master engraver Reinhard Gemmrich with hand cut winding wheels by Jochen Benzinger in Germany, blued screws and swan neck regulator. 1,795.00

Movement modifications

-Rework movements 4th wheel with new ETA short pivot 4th wheel for dial without sub second hand. 75.00

-Rework standard movement with blued screws and sun bursted winding wheels. 95.00

Dial

-Choice of UT dial and hand set.